Industry News

In industrial settings, many devices do not directly consume alternating current – they require direct current. Motor speed control, electroplating, electrolysis, charging, electromagnets, direct welding machines... The front end of these devices almost invariably includes one component: rectification. And at the front end of the rectification circuit, there is often a device that is not particularly prominent but is absolutely indispensable – The ZBK rectifier single-phase transformer.

When it comes to voltage issues, many people first think of using a voltage stabilizer.
However, in some scenarios, you don’t need to stabilize the voltage, but to adjust it to different values — for example, gradually raising it from 0V to 220V, or lowering 220V to 110V to power old equipment.

In the power system, there is a type of equipment that has existed for over a hundred years, with its principle remaining unchanged and its structure not being fancy, but it has been in use all along:
The oil-immersed transformer.

The TNS series three phase fully automatic AC voltage regulators are not simple "voltage regulators", but an industrial-grade three phase power protection system.

Not long ago, we received a feedback from a Philippine customer. He purchased an Yibaling TND-6KVA single phase high-precision voltage stabilizer a few months ago to protect the measuring equipment of a local small factory.

In industrial production, motors are ubiquitous. Fans, pumps, compressors, conveyor belts... They consume over 60% of the electricity in factories. For a long time, the operation mode of these motors was very "rough": either full speed or shutdown. When the air volume was high, the valves were closed; when the water pressure was high, the bypass was opened - a large amount of energy was wasted in pipes and baffles.