News

Some electricity usage scenarios are not in factories or workshops, but in —A house far from the municipal power grid. The customer’s requirement is straightforward: they own a standalone property and need a transformer installed outdoors to operate around the clock and supply power to the entire house. Sounds simple? But when broken down in detail, several overlapping conditions make it impossible to solve with just "any off-the-shelf unit": Outdoor installation: Must be rainproof, dustproof, and sun-resistant, requiring a high enclosure protection rating.

Electricity leaving power plants has an extremely high voltage (tens of thousands or even hundreds of thousands of volts), which cannot be directly used by industrial machinery or residential households. The voltage needs to be stepped down. Who does this job? Oil-immersed transformers. They are neither novel nor cutting-edge, and their working principle has remained largely unchanged for over a century. Yet to this day, you will most likely find one in every substation, under every utility pole, and in the distribution room of every factory.

In industries such as mining, building materials, metallurgy, and chemical engineering, there exists a type of "tough-to-handle" equipment: Heavy-duty belt conveyors, hoists, crushers, and large fans. These devices share a common problem: extremely difficult startup. At motor startup, the instantaneous current surges to 6-8 times the rated value, dragging down the grid voltage. The drive belt creaks under tension, and the reducer gears endure massive impact torque. Before the equipment even begins operation, it sustains damage. Heavy-duty vector frequency converters are specifically designed to solve this problem.

When a set of automated equipment is to be installed in an American factory, or an American laboratory instrument is to operate normally in China, the first "obstacle" is often not the technical parameters, but the mismatch of voltage. Recently, Zhejiang Yibaling Power Supply Equipment Co., Ltd. completed the design and delivery of a customized dual-phase (phase-separated) transformer based on the actual grid conditions of an export equipment enterprise in the United States. This is not a "standard product", but a specialized solution specifically developed for the typical 120V/240V phase-separated power supply system in the United States.

In industrial settings, many devices do not directly consume alternating current – they require direct current. Motor speed control, electroplating, electrolysis, charging, electromagnets, direct welding machines... The front end of these devices almost invariably includes one component: rectification. And at the front end of the rectification circuit, there is often a device that is not particularly prominent but is absolutely indispensable – The ZBK rectifier single-phase transformer.

When it comes to voltage issues, many people first think of using a voltage stabilizer.
However, in some scenarios, you don’t need to stabilize the voltage, but to adjust it to different values — for example, gradually raising it from 0V to 220V, or lowering 220V to 110V to power old equipment.